三菱 FX2N 三菱-FX2N-20GM 用戶指南
資料介紹：
The state of FX2N-20GM is displayed by LED.
Name of LED Content
POWER LED lights when power is supplied. If LED is not lit, check power supply voltage and
current.
READY-X LED lights when accepting an x-axis instruction. During pulse output or when an error
occurs, the LED is off.
READY-Y LED lights when accepting a y-axis drive instruction. During pulse output or when an
error occurs, the LED is off.
ERROR-X LED is lit or blinks when an error occurs in the positioning drive of x axis.
ERROR-Y LED is lit or blinks when an error occurs in the positioning drive of y axis.
BATT LED lights when the buttery voltage drops. (Turn Power Supply On)
CPU-E CPU error. Incompatible system configuration, excess noise, etc.
4.3 I/O connector
The pin array of the I/O connector is as follows.
All terminals with identical names are shorted internally (Ex. COM1-COM1, VIN-VIN, etc.).
Do not wire “•” terminals.
Refer to the FX2N-10GM, FX2N-20GM HARDWARE PROGRAMMING MANUAL for wiring information.
=
=
=
=
"
=
=
&
"
=
=
#0!5+% #0!5+% #0!5+% #0!5+%
上一條：
下一條：相關(guān)下載
Bulude 廣州凌控自動(dòng)化科技有限公司 ◎版權(quán)所有
銷售熱線：020-28625769 傳真：020-28029239
