菱 Temperature Control 三菱-Temperature Control 模塊 用戶手冊
所屬類別：三菱
>> 伺服系統(tǒng)
資料介紹：
When disconnecting a cable without a connector, first loosen the screws on the part that is
connected to the module.
Pulling the cable when it is still connected to the module may cause damage to the module or
cable, or misoperation due to cable contact failure.
• Always ground the shielded cable for the programmable controller.
There is a risk of electric shock or malfunction.
• Use applicable solderless terminals and tighten them with the specified torque. If any solderless
spade terminal is used, it may be disconnected when the terminal screw comes loose, resulting
in failure.
• When wiring, be sure to verify the rated voltage of the product as well as the terminal layout. Fire
or failure may result if incorrect voltage is input or incorrect wiring is performed.
• Connecting terminals with incorrect voltage may result in malfunction or mechanical failure.
上一條：
下一條：相關(guān)下載
Bulude 廣州凌控自動化科技有限公司 ◎版權(quán)所有
銷售熱線：020-28625769 傳真：020-28029239
